Generator Set Specifications
Minimum Rating
6.8 kVA / 6.8 kW
Maximum Rating
7.5 kVA / 7.5 kW
Emissions/Fuel Strategy
Fuel Optimised
50 Hz Prime
6.8 kVA / 6.8 kW
50 Hz Standby
7.5 kVA / 7.5 kW
60 Hz Prime
- / -
60 Hz Standby
—
Frequency
50 Hz
Speed
1500 RPM
Voltage
230-240 Volts
50 Hz Prime Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
60 Hz Prime Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
50 Hz Standby Rating
Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2.
Engine Specifications
Engine Model
Perkins® 403A-11G1
Bore
77.0 mm (3.0 in)
Stroke
81.0 mm (3.2 in)
Governor Type
Mechanical
Displacement
1.1l (69.0 cu. in)
Compression Ratio
23:01
Engine
- Air Cleaner
- Lube oil drain valve
- Engine filled with lubrication oil
- High Coolant Temperature Shutdown
- Low Oil Pressure Shutdown
Cooling
- Package mounted radiator
- Radiator & Cooling Fan
- Coolant Drain Valve
- Fan, Fan drive and battery charging Alternator drive fully guarded to meet EC Machinery Directive
- Cooling System filled with Coolant mix
Exhaust
- Exhaust flange outlet
- Exhaust stub pipe and gasket
Alternator
- Leroy Somer
- SHUNT Excitation
- IP23 Protection
Control Panel
- DeepSea 4520
Mounting
- Skid Base, Formed Steel
- Certified Base Mounted Lifting Eyes, and Rear Drag Eyelets
- Anti-vibration mounts
- Battery Tray and Cables
Optional Equipment
Exhaust
- Industrial
Control Panels
- Deep Sea DSE7410
- Deep Sea DSE7420
Starting/Charging
- Lead Acid battery (Dry)
General
- Upgrade to Standard Set for "CE" Certification
- EEC Declaration of Conformity
- 8 Hour, 600L, 1000L, 2000L fuel tanks
- Level 1, 2, 3 Sound attenuated, galvanised steel enclosure
Standard Equipment
Engine
- Air Cleaner
- Lube oil drain valve
- Engine filled with lubrication oil
- High Coolant Temperature Shutdown
- Low Oil Pressure Shutdown
Cooling
- Package mounted radiator
- Radiator & Cooling Fan
- Coolant Drain Valve
- Fan, Fan drive and battery charging Alternator drive fully guarded to meet EC Machinery Directive
- Cooling System filled with Coolant mix
Exhaust
- Exhaust flange outlet
- Exhaust stub pipe and gasket
Alternator
- Leroy Somer
- SHUNT Excitation
- IP23 Protection
Control Panel
- DeepSea 4520
Mounting
- Skid Base, Formed Steel
- Certified Base Mounted Lifting Eyes, and Rear Drag Eyelets
- Anti-vibration mounts
